Advertisement
installing RF Dongle
Image shown may differ from your TV.
1
Locate the designated Velcro attachment location on the
TV. Then tear off the protection paper and attach the Velcro.
(The attachment location is different depending on the TV
model you own)
2
Connect the RF Dongle Cable plug on the RF Dongle to a
USB or USB Apps jack on the TV.
Velcro
3
Attach the RF Dongle to the velcro as shown below and
then turn on the TV.
4
Make sure that your TV is turned on and then register the
Magic Remote Control with your TV after 20 seconds.
*
If the RF Dongle for the wireless media box is attached,
attach the RF Dongle for the Magic remote control on the
below right of the back of the TV.
*
To avoid wireless interference, keep the distance between
the Wi-Fi dongle and the remote RF dongle over 20 cm.
4
Advertisement
