LG Magic Remote AN-MR19BA Manual
Also See for AN-MR19BA:


LG Magic Remote AN-MR19BA Manual

  • Contents in this manual may be changed without prior notice due to upgrade of product functions.
  • Complete instructions are included in the owner's manual.


(Depending upon country)

  • Magic Remote and Alkaline Batteries (AA)
  • Owner's manual


  • Please read this manual carefully.
  • Press the top of the battery cover, slide it back, and lift the cover as shown below.
  • To replace batteries, open the battery cover, replace alkaline batteries (1.5 V, AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.
  • To remove the batteries, perform the installation actions in reverse. Don't mix old or used batteries with new ones. Close the cover securely.
  • Open the battery cover to find the label.



  • The remote control image shown may differ from the actual product.
  • The order of description may differ from the actual product.
  • Some buttons and services may not be provided depending on models or regions.

* To use the button, press and hold for more than 1 second.


How to register (pair) or deregister (unpair)

How to register (pair) the Magic Remote

To use the Magic Remote, first pair it with your TV.

  1. Put batteries into the Magic Remote and turn the TV on.
  2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

- If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to register (pair) the Magic Remote

How to deregister (unpair) the Magic Remote

Press and hold the (HOME) and buttons at the same time for five seconds, to unpair the Magic Remote with your TV.

- Pressing and holding the button will let you cancel and re-register Magic Remote at once.

How to deregister (unpair) the Magic Remote

How to use

  • Shake the Magic Remote slightly to the right and left or press (HOME), (INPUT), or (Q. Settings) buttons to make the pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel (OK) button.)
  • If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear.
  • If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen.
  • The Magic Remote depletes batteries faster than a normal remote due to the additional features.

How to use


Model No. AN-MR19BA
Range of frequency 2.400 GHz to 2.4835 GHz
Output Power (Max.) 4 dBm
Channel 40 channels
Power source AA 1.5 V,
2 alkaline batteries are used
Operational temperature range 0°C to 40°C (32°F to 104°F)

Supported LG TVs

  • 2018 TVs / 2017 TVs
    • W8/G8/E8/C8/B8/A8/SK9*/SK8*/SK7*/UK9*/UK8*/UK7*
    • W7/G7/E7/C7/B7/SJ9*/SJ8*/SJ7*/UJ9*/UJ8*/UJ7*
    • UK6*/LK6*/LK5*/UJ6*/LJ6*/LJ5* (Please verify whether the TV Bluetooth)
  • 2019 TVs
    • W9/E9/C9/B9/SM9*/SM8*/UM8*/UM7* (Please verify whether the TV Bluetooth)

* 2017 TVs can be used after their software has been updated.
* Not all models listed are supported in all countries.
* Models listed are subject to change without prior notice.


Printed in Korea
Copyright © 2019 LG Electronics Inc. All Rights Reserved.

Documents / Resources


Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download LG Magic Remote AN-MR19BA Manual


Table of Contents