Installing Batteries - LG Magic Remote Owner's Manual

Accessories
• Magic Remote and Alkaline Batteries (AA)
• Owner's manual

Installing Batteries

• Press the top of the battery cover, slide it back, and lift the cover as
shown below.
• To replace batteries, open the battery cover, replace alkaline batteries
(1.5 V, AA) matching and ends to the label inside the
compartment, and close the battery cover. Be sure to point the remote
control at the remote control sensor on the TV.
• To remove the batteries, perform the installation actions in reverse.
Don't mix old or used batteries with new ones. Close the cover
securely.
• Failure to match the correct polarities of the battery may cause the
battery to burst or leak, resulting in fire, personal injury, or ambient
pollution.
• Open the battery cover to find the label.
Register/Unregister the Magic Remote
• Turn on the TV and press the Wheel(OK) on the Magic remote for registration.
• Press and hold the (Home) button and (Back) button together for more than 5 seconds to
disconnect the Magic Remote.
• Press and hold the (Home) button and (Q. Settings) button together for more than 5 seconds to
disconnect and re-register the Magic Remote at the same time.
2