Installing The Battery And Microsd Card - LG Lucid VS840 Owner's Manual
Superior outdoor visibility (nova display), 4g lte plus snapdragon processor with 1.2ghz dual cpus, corning gorilla glass touch screen, 5 mp autofocus camera with led flash, vga front-facing camera, 1080p video capture
Hide thumbs
Also See for Lucid VS840:
- Guía del usuario (236 pages) ,
- Owner's manual (222 pages) ,
- Quick start manual (2 pages)
Advertisement
Available languages
Available languages
The Basics
18
Installing the Battery and microSD Card
NOTE
It is important to fully charge the battery before initial use of the phone.
Installing the battery
The phone comes with a rechargeable battery. Keep the battery charged
while not in use in order to maximize talk, use, and standby time. The
battery charge level is shown at the top right corner of the screen.
1 Use the fingertip
cutout at the bottom
of the phone to
remove the back
cover.
Removing the battery
1. Turn the phone off and use the fingertip cutout at the bottom of the phone
to remove the back cover.
2. Use the fingertip cutout at the bottom of the battery compartment to lift the
battery out.
NOTE
Be careful not to scratch or damage the inside of the back cover as this is where the antenna
is located.
2 Align the battery
contacts with the
terminals in the
battery compartment
and push the battery
down until it clicks
into place.
3 Place the back cover
over the battery
compartment, then
press it downward
until it clicks into
place.
Advertisement
Chapters
