Installing The Battery, Sim Card And Microsd Card - LG Lucid2 VS870 User Manual

The Basics
10

Installing the Battery, SIM Card and microSD Card

NOTE It is important to fully charge the battery before initial use of the phone.
WARNING! Your device includes a heat sensor activated by the battery temperature. A pop-up
message will be displayed if the device will turn itself off or stopped charging as in
the following cases:
Installing the battery
The phone comes with a rechargeable battery. Keep the battery charged
while not in use in order to maximize talk, use, and standby time. The
battery charge level is shown at the top right corner of the screen.
1. Place your fingernail
in the USB/Charger
Port cutout at the
bottom of the phone
and pop the cover off
the phone.
Removing the battery
1. Turn the phone off and insert your fingertip in the USB/Charger Port at the
bottom of the phone and gently lift off the back cover to remove it.
Your phone may turn itself off when the battery temperature becomes too high
(above 60°C) during use.
Charging may stop temporarily when the battery temperature becomes too high
(above 55°C) or too low (-10°C).
2. Insert the battery,
making sure to align the
gold contacts. Press
down gently to secure
the battery.
3. Place the cover over
the back of the
phone, then press
down along the
edges to secure the
cover.