Setting The Timer - LG Lucid VS840 Owner's Manual

to wait before sounding the alarm again if it is not dismissed. You can set
the alarm to ring repeatedly from 5 minutes up to 1 hour.
5. Touch Vibration to checkmark the setting and have the phone vibrate, in
addition to playing the ringtone.
6. Touch Alarm tone to select a ringtone for the alarm, then touch OK. The
ringtone plays briefly when you select it.
7. Touch Puzzle lock to checkmark the setting, which requires you to wake
up enough to solve a simple puzzle to dismiss the alarm.
8. Touch Memo to enter a name for the alarm.
9. When you're finished, touch Save.
When the alarm sounds
Touch Stop or use the gesture feature of simply flipping the device
over to stop the alarm.
Touch Snooze to stop the alarm for the snooze duration you set.
NOTE If Puzzle lock is set to On, using the gesture feature of flipping the device over will
snooze the alarm instead of turning it off

Setting the Timer

The Timer application can be used to alert you with an audible signal when
a set amount of time has passed.
1. Open the Alarm/Clock application and touch the Timer tab.
2. Set the time by scrolling Hour, Minute and/or Second on the time wheel.
3. Touch Vibrate to checkmark the setting and have the phone vibrate
when the set time expires.
4. Touch Alert Tone to select an alert tone for the timer, then touch OK.
5. Touch Start to begin the time countdown.
6. Once the alarm sounds, touch Stop to stop the timer.
Tools
171