Troubleshooting - Dynex DX-E202 User Manual

10/100Mb CardBus Network Card

Troubleshooting

If you are having problems with your network, check the following:
Verify network card installation
If your card is not installed correctly, including the network system software or device drivers,
your network will not function correctly.
To verify that your card is correctly installed:
1 Click Start, then right-click My Computer and click Properties. The System
Properties window opens.
2 Click the Hardware tab and click Device Manager. The Device Manager window
opens.
3 Double-click Network adapters to display the list of network adapters. You see
Dynex DX-E202 CardBus 10/100Mb Network Adapter.
If you see a yellow exclamation point or red "X" over the icon adjacent to Dynex DX-E202
CardBus 10/100Mb Network Adapter your network card is not installed correctly or may have
a problem. Double-click Dynex DX-E202 CardBus 10/100Mb Network Adapter to read
the explanation of the problem. This information will be helpful if you need to contact Dynex
technical support.
5