Table of Contents
Advertisement
en
The appliance is now fully operational
again, and you can re-insert the filter
holder with the BRITA MAXTRA filter
cartridge.
Maintenance and daily
cleaning
¡
¡
Risk of electric shock
Switch off and unplug the appliance before
cleaning.
Never immerse the appliance in water.
Do not use a steam cleaner.
Wipe the housing with a damp soft cloth.
►
Rinse out the water tank with water only.
►
Do not place it in the dishwasher.
The lid of the water tank and all parts
►
of the cup shelf can be washed in the
dishwasher.
Clean water tank daily and refill with
►
fresh water.
Simple troubleshooting
Problem
The appliance is not working
and none of the control lights
are illuminated.
The machine is running but it is
not producing any water.
It is not possible to set the
temperature.
The water splutters when
drawn.
Disposal
Dispose of packaging in an environmen-
tally-friendly manner. This appliance is
labelled in accordance with the European
Directive 2002/96/EG relating to waste
electrical and electronic equipment
– WEEE. The directive provides the
framework for the EU-wide take-back and
disposal of end-of-life appliances. Please
ask your specialist retailer about current
disposal facilities.
Guarantee
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from
the dealer from whom the appliance was
purchased. The bill of sale or receipt must
be produced when making any claim under
the terms of this guarantee.
Right of modification reserved.
Possible cause
The appliance may have no
power supply.
The water tank is not fitted
correctly.
The water tank was removed
during the brewing stage or
there is air in the system.
The float in the water tank is
stuck.
The child-proof lock is activated. Deactivate the child-proof lock.
The cup stand is set too low.
Build-up of limescale in the
water outlet.
A
Remedy
Check the appliance to see if it is
connected to the power supply.
Please check that the water tank is
correctly fitted.
Draw the water once again.
Clean the water tank and release
the float.
Reduce the distance between the
water outlet and the cup by raising
the cup stand.
Descale the appliance as de-
scribed in the chapter "Descaling".
9
THD20.. 06/2012
Hide quick links:
Advertisement
Table of Contents
