Table of Contents
Advertisement
4
Overview
1 on/off switch
2 Water outlet
3 start/stop button
4 temp. set button
5 Display elements
a L Ambient water
b Water at 70 °C
c Water at 80 °C
d Water at 90 °C
e Q Boiling water
f P Child lock
g O Add water / tank missing
h N Descale
i M Replace filter
6 Removable water tank
a Tank lid
b Float
7 Filter cartridge
8 Filter holder
9 Cable storage compartment
10 Height adjustment
11 Cup stand
a Drip tray
b Cup shelf
Operating controls
on/off switch
You use the on/off switch to turn the appli-
ance on or completely off. When you switch
it on, all nine display items light up briefly.
The selected temperature (for example,
L ) lights up as long as the appliance is
switched on.
Note: To save energy, it is recommended
to turn the appliance off after each use.
start/stop button
Press the start/stop button to draw water.
To cut off the water supply early, press the
button again.
Note: The temperature setting flashes
while the machine provides water.
Robert Bosch Hausgeräte GmbH
temp. set button
Press the temp. set button to cycle through
and select one of the temperature settings.
The selected temperature lights up.
Display elements
On this setting, ambient water will
L
be supplied.
With the 70 °C, 80 °C and 90 °C
settings, the water will be heated to
the selected temperature.
Examples
70 °C – for white tea
70 °C
80 °C
80 °C – for green tea
90 °C – for instant beverages such
90 °C
as hot chocolate or coffee
Note: The temperatures at the
water outlet can vary by approxi-
mately ± 5 %.
At this setting, the water will be
boiled. This setting is suitable, for
Q
example, for black tea or instant
soups.
When the M icon lights up, the
BRITA MAXTRA filter cartridge
should be replaced. You can
continue to heat water. For informa-
tion about replacing the water
M
filter cartridge, see the section
titled " BRITA MAXTRA water filter
system".
After changing the filter, hold down
the start/stop button for at least
2 seconds, M will cease to light.
The O icon lights up when the
water tank needs to be refilled or is
O
missing. Remove the water tank, fill
it with fresh, cold water and return it
to its correct position.
The N icon lights up when the
appliance needs to be descaled.
N
Always follow the instructions in the
"Descale" section when you descale
the appliance.
en
Hide quick links:
Advertisement
Table of Contents
