Programming The Hob; Switching The Hob On And Off; Set The Hotplate; Cooking Guidelines Table - Bosch PIA611T66B Installation Instructions Installation Instructions Manual

Exxcel 4 zone ceramic induction hob black glass
Table of Contents

Advertisement

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off using the main switch.
To turn on: press the
symbol. The indicator above the main
%
switch lights up. The hob is ready for use.
To turn off: press the
%
symbol until the indicator above the
main switch disappears. All hotplates are turned off. The
residual heat indicator stays lit until the hotplates have cooled
off.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.

Set the hotplate

Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.

Cooking guidelines table

The table below contains some examples.
Use power level 9 to begin cooking.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and keeping warm
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Slow cooking, simmering
Potato dumplings
Fish
White sauces (e.g., bechamel)
Whipped sauces (e.g., Bearnaise, Hollandaise)
* Uncovered cooking
** Uncovered
To select the power level:
The hob must be switched on.
Press the + or - symbol of the required hotplate and its
1.
display lights up
.
In the following 10 seconds, press the + or - symbol. The
2.
default settings appear.
+ symbol = power level 9.
- symbol = power level 4.

To change the power level, press the + or - symbol until the
3.
required power level appears.
Turning off the hotplate
Press the + or - symbol until
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Power level
1-1.
1-1.
1-2
1.-2.
3-4
2.-3.
2.-3.
4.-5.*
4-5*
1-2
3-4

appears. The hotplate turns off
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pia6..t.6.

Table of Contents