Care And Cleaning; Hob; Hob Frame; Fixing Malfunctions - Bosch PIA611T66B Installation Instructions Installation Instructions Manual

Press the @ symbol several times until the indicator for the
3.
required function appears.
Then choose the required setting using the + and - symbols.
4.

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■

Fixing malfunctions

Malfunctions are commonly due to small details. Before calling
the Technical Assistance Service, you should consider the
following advice and warnings.
Indicator Malfunction
none The electric power supply has been inter-
rupted.
The appliance has not been correctly con-
nected according to the connection dia-
gram.
Electronic system malfunction.
The control panel is damp or an object is
flashes
"
resting on it.
* If the indication persists, call the Technical Assistance Service.
Do not rest hot pans on the control panel.
Push the @ symbol again and hold it for longer than
5.
4 seconds.
The settings have been properly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Glass scraper
Remove dried-on food remains using a glass scraper.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
Solution
Use other electrical appliances to check whether there has been a
power cut.
Check that the appliance has been connected correctly according to
the connection diagram.
If the above checks do not resolve the malfunction, contact the Tech-
nical Assistance Service.
Dry the control panel area or remove the object.
15