Asus RT-N53 User Manual page 38

Dual-band wireless-n router
Hide thumbs Also See for RT-N53:
Table of Contents

Advertisement

If the ADSL "LINK" light blinks continuously or stays off,
Internet access is not possible - the Router is unable to
establish a connection with the ADSL network.
• Ensure that all your cables are all properly connected .
• Disconnect the power cord from the ADSL or cable modem,
wait a few minutes, then reconnect the cord.
• If the ADSL light continues to blink or stays OFF, contact your
ADSL service provider.
Network name or encryption keys are forgotten.
• Try setting up the wired connection and configuring the
wireless encryption again.
• Press the Reset button at the back side of the wireless router
for more than five seconds.
How to restore the system to its default settings?
• Press the Reset button at the back side of the wireless router
for more than five seconds.
• Refer to the section Restoring/Saving/Uploading settings
in Chapter 3 of this user manual.
The following are the factory default settings:
User Name:
Password:
Enable DHCP:
IP address:
Domain Name:
Subnet Mask:
DNS Server 1:
DNS Server 2:
SSID:
38
admin
admin
Yes (if WAN cable is plugged in)
192.168.1.1
(Blank)
255.255.255.0
192.168.1.1
(Blank)
ASUS

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RT-N53 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF