Table of Contents
Advertisement
5.
You have multiple devices which could serve as source for a driver disk.
Choose one you like to use and select OK, then press <Enter>.
You have multiple devices which could
serve as source for a driver disk.
Which would you like to use?
6.
Insert the Red Hat
select OK, then press <Enter>.
Insert your driver disk into /dev/sdb and
press "OK" to continue.
The drivers for the RAID card are installed to the system.
When asked if you will load additional RAID controller drivers, select No, then
7.
press <Enter>.
Do you wish to load any more
driver disks?
8.
Follow the onscreen instructions to finish the OS installation.
7-10
Driver Disk Sou8rce
sdc
sdd
sdb
sr0
OK
Cancel
Enterprise RAID driver disk to the USB floppy disk drive,
®
Insert Driver Disk
OK
More Driver Disks?
Yes
No
Back
Chapter 7: Driver installation
Advertisement
Table of Contents
