Creating A Raid Set - Asus RS700-E7/RS4 User Manual

6.3.1

Creating a RAID set

To create a RAID set
From the utility main menu, select 1. Create RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1104 Copyright(C)
[↑↓]Change
2. Enter a name for the RAID set and press <Enter>.
When the RAID Level item is selected, press the up/down arrow key to select
3.
a RAID level to create, and then press <Enter>.
When the Disks item is selected, press <Enter> to select the hard disk drives
4.
you want to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0 ST3300656SS HWAS0000991753TR 279.3GB
1 ST3300656SS 37VN00009846RAJ1 279.3GB
2 ST3300656SS 397600009846UEDY 279.3GB
3 ST3300656SS GWC50000991756G6 279.3GB
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5. Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6-26
2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size:
Capacity: 0.0
Enter a unique volume name that has no special characters and is
16 characters or less.
[TAB]-Next [ESC]-Previous Menu
[ SELECT DISKS ]
Serial #
Select 2 to 6 disks to use in creating the volume.
]
Volume0
128KB
GB
Create Volume
[ HELP ]
[ENTER]-Select
Size Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 6: RAID configuration