Table of Contents
Advertisement
Red Hat
Enterprise Linux OS 5.0
®
To install the RAID controller driver when installing Red Hat
1.
Boot the system from the Red Hat
2.
At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then
press <Enter>.
The number of ata varies with the hard disk drive number you have when
building a RAID set. For example, if you want to build a RAID set with 6 hard
disk drives, type command line: linux dd noprobe=ata1 noprobe=ata2
noprobe=ata3 noprobe=ata4 noprobe=ata5 noprobe=ata6.
-
To install or upgrade in graphical mode, press the <ENTER> key.
-
To install or upgrade in text mode, type: linux text <ENTER>.
-
Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd noprobe=ata1 noprobe=ata2
Select Yes using the <Tab> key when asked if you have the driver disk, then
3.
press <Enter>.
Main Menu
Do you have a driver disk?
Yes
4.
Insert the Red Hat
select OK, then press <Enter>.
Insert your driver disk into /dev/fd0 and
press "OK" to continue.
OK
The drivers for the RAID card are installed to the system.
ASUS RS700-E7/RS4
No
Enterprise RAID driver disk to the USB floppy disk drive,
®
Insert Driver Disk
Back
OS installation CD.
®
Enterprise OS:
®
7-7
Advertisement
Table of Contents
