Table of Contents
Advertisement
Using the Objects command
To initialize the virtual drives using the Objects command
From the Management Menu, select Objects > Virtual Drive, and then
1.
press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Select the virtual drive to initialize from the Virtual Drives sub-menu, and
2.
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
6-14
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Objects
Adapter
Virtual Drive
Physical Drive
Change VD Parameters
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version
Virtual Drive(1)
Virtual Drive 0
Objects
Adapter
Virtual Drive
Physical Drive
Press ENTER To Select A VD, <Del> To Delete A VD
A.10.09231523R
A.10.09231523R
Select VD
Chapter 6: RAID configuration
Advertisement
Table of Contents
