2.
Press the left load lever with your
thumb (A), then move it to the left (B)
until it is released from the retention
tab.
To prevent damage to the socket
pins, do not remove the PnP cap
unless you are installing a CPU.
3.
Slightly lift the load lever in the
direction of the arrow.
4.
Press the right load lever with your
thumb (C), then move it to the right (D)
until it is released from the retention
tab. Lift the load lever in the direction
of the arrow (E).
2-4
A
B
Load lever
C
Chapter 2: Hardware setup
E
D