Asus ESC4000 G2 User Manual page 167

Red Hat Enterprise Linux OS 5.6
®
To install the LSI MegaRAID controller driver when installing Red Hat
OS:
1. Boot the system from the Red Hat
2. At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then
press <Enter>.
The number of ata varies with the hard disk drive number you have when
building a RAID set. For example, if you want to build a RAID set with 6 hard
disk drives, type command line: linux dd noprobe=ata1 noprobe=ata2
noprobe=ata3 noprobe=ata4 noprobe=ata5 noprobe=ata6.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd noprobe=ata1 noprobe=ata2
Select Yes using the <Tab> key when asked if you have the driver disk, then
3.
press <Enter>.
Main Menu
Do you have a driver disk?
Yes
4. Insert the Red Hat
select OK, then press <Enter>.
Insert Driver Disk
Insert your driver disk into /dev/fd0
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
ASUS ESC4000 G2 Series
No
Enterprise RAID driver disk to the USB floppy disk drive,
®
OK Back
OS installation CD.
®
Enterprise
®
7-7