2.6
Cable connections
•
•
Pre-connected system cables
1.
20-pin SSI power connector (from power supply to motherboard)
2.
8-pin SSI power connector (from power supply to motherboard)
3.
Power supply SMBus connector (from power supply to motherboard)
4.
System fan connectors (from motherboard FRNT_FAN1, FRNT_FAN2
FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, FRNT_FAN6, and FRNT_FAN7 to
system fans)
5.
USB connector (from motherboard to front I/O board)
6.
Auxiliary Panel connector (from motherboard to front I/O board)
7.
Panel connector (from motherboard to front I/O board)
8.
SATA connectors (from motherboard to SATAII/SAS backplane board)
9.
SGPIO1 connector (from motherboard to SATAII/SAS backplane board)
2-16
The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
Refer to Chapter 4 for detailed information on the connectors.
5
6
1
7
4
4
9
8
3
2
4
4
4
Chapter 2: Hardware setup