2.5.7
APM
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
2.5.8
Network Stack
Network Stack [Disable Link]
Enables or disables the UEFI network stack. Configuration options: [Disable Link] [Enable]
The following two items appear only when you set the Network Stack item to [Enable].
Ipv4 PXE Support [Enabled]
This item allows users to disable or enable the Ipv4 PXE Boot support. Configuration
options: [Disable Link] [Enable]
Ipv6 PXE Support [Enabled]
This item allows users to disable or enable the Ipv6 PXE Boot support. Configuration
options: [Disable Link] [Enable]
2-22
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
ASUS P8H61-I R2.0