Using The Remote Control; Installing Remote Control Batteries - Dynex DX-32L151A11 User Manual

Using the remote control

Item Name Description
Press once to select a device connected to the
HDMI 1 jack.
HDMI
3
Press twice to select a device connected to the
HDMI 2 jack.
Press the number buttons to enter channel
numbers or the parental control password.
Press the dot button to select a digital
4 Numbers/.
sub-channel.
For more information, see "Selecting a channel"
on page 12.
Press to open the INPUT SOURCE menu. For
INPUT more information, see "Selecting the video
5
input source" on page 12.
Press to increase or decrease the volume.
6 VOL+ / VOL–
Press to open the on-screen menu.
7 MENU
Press
menus.
8
Press
menus or to adjust menu settings.
Press to confirm selections in on-screen menus
9 ENTER
or to open sub-menus.
Press to open the DTV program guide (if
10 GUIDE available). For more information, see
"Displaying program information" on page 13.
In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
11 MTS/SAP
In digital TV mode (DTV), press to select the
audio track. For more information, see
"Selecting the audio mode" on page 16.
Press to turn closed captioning on or off. For
12 CCD more information, see "Turning closed
captioning on or off" on page 23.
Press to select the screen aspect ratio. You can
select Auto, Normal, Zoom, Wide, and
13 ZOOM
Cinema. For more information, see "Adjusting
the TV picture" on page 14.
Press to open the favorite channel list. For more
14
FAVORITE information, see "Setting up a favorite channel
list" on page 18.
Press to select the device connected to the AV
15 VIDEO
IN Jack.
Press to select the TV as the video input source.
16 TV For more information, see "Selecting the video
input source" on page 12.
Press to go to the last viewed channel. For more
17 RECALL information, see "Selecting a channel" on page
12.
Press to go to the next or previous channel in
the channel list. For more information, see
18
CH /CH
"Automatically scanning for channels" on
page 17 and "Selecting a channel" on page 12.
Press to mute the sound. Press again to restore
19 MUTE
the sound.
Press to display the information banner. For
20 INFO more information, see "Displaying program
information" on page 13.
Press to close the on-screen menu.
21 EXIT
Press to set the sleep timer. For more
22
SLEEP information, see "Setting the sleep timer" on
page 26.
or to move up or down in on-screen
or to move left or right in on-screen
DX-32L151A11/DX-37L130A11
Item Name Description
Press to open the channel list. For more
23 CH-LIST information see "Selecting a channel" on
page 12.
Press to select the picture mode. You can select
Vivid, Standard, Theater, Sports, Energy
24 PICTURE
Saving, and Custom. For more information, see
"Adjusting the TV picture" on page 14.
Press to select the sound mode. You can select
Standard, Movie, Music, News, or Custom. For
25
AUDIO
more information, see "Adjusting the sound" on
page 15.
Using the remote control

Installing remote control batteries

To install remote control batteries:
1 Press down on the battery compartment cover lock, then remove
the remote control cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
Battery precautions:
• Dispose of batteries as hazardous waste.
• Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
• Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
• If the remote control is not used for an extended period of time,
remove the batteries.
• Do not expose batteries to excessive heat such as sunshine, fire, or
other heat sources.
7