Asko T741C Quick Start Manual

Dryer Quick Start Guide
We know you're excited about owning an ASKO dryer and you're anxious to get started, so here is a brief summary of the operating
procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
THE CONTR THE CONTR THE CONTR THE CONTROL P THE CONTR OL PANEL OL P OL P OL P
Power Button
Turns the power to the
machine off and on.
Power Indicator Light
Glows when the power
is turned on.
Power Button Power Button Power Button Power Button Power Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power
must be on before you can start the machine.
Star t Button Star Star t Button t Button t Button
Star Star t Button
This button starts the dryer. If you open the door during a program, the dryer will stop tumbling automatically. To continue the
Start
program, close the door and press Start.
Programs Programs Programs
Programs Programs
Program Definition
Program Definition
Heavy (P1) For items that are extremely difficult to dry, such as jeans and thick towels.
Normal (P2) Cotton w/out elastic and/or decorative trim.
Delicate (P3) Cotton with elastic and/or decorative trim, linen (white and colorfast).
Iron Dry (P4) Synthetics, polyester, cotton/polyester blends.
Timed Dry Any fabric that can be machine dried. (See note below.)
Air Fluff This setting does not heat. It simply circulates the air as the clothes tumble to shake out
the dust and refresh the clothes. (See note below.)
Options Options Options Options Options
Time Set – If you set the program knob to Timed Dry or Air Fluff, you must select the length of drying time by pressing this button until
the minutes you wish to dry the load displays.
Wrinkle-free – The Wrinkle-free option prevents garments from wrinkling if you're unable to remove them right away. You can select
one, two, or three hours by pressing the Wrinkle-free button until the number of hours you prefer displays.
Delay – Press the button until the number of hours you wish to delay starting the machine displays on the LED. You can set delayed start
from 1 to 24 hours.
Temperature –You have two temperature options: Normal and Low. The Normal setting should be used for heavier fabrics, the Low
setting for lighter, more delicate fabrics. The indicator light will stay lit when Low is selected.
ANEL ANEL ANEL ANEL
Iron dry
Timed dry
Power
Air fluff
Time set
Wrinkle free
Delay
Temperature
Signal
Quick cool-down
Program Knob
LED
Window
Programs
Heavy
Normal
Delicate
Option Buttons
T741C
Start Button
Press to start a program.
Stop Button
Press and hold for
approximately
3 seconds to cancel a
program.