Microphone/Line-In Jack; External Video Port - Fujitsu FPCR32972 User Manual

Microphone/Line-In Jack

The microphone/line-in jack allows you to connect an external mono microphone. Your microphone must
be equipped with a 1/8"(3.5 mm) stereo mini-plug in order to fit into the microphone jack of your
notebook. In order to connect a microphone follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.

External Video Port

The external video port allows you to connect an external monitor or LCD projector. In order to connect an
external video device, follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is
seated.
3
Tighten the two hold-down screws, located
on each end of the connector.
P
RESSING THE
YOUR DISPLAY VIDEO
,
CHOICE
,
ONLY FINALLY MOVING TO BOTH THE BUILT
[F ] + [F10]
N KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND
. E
ACH TIME YOU PRESS THE KEY COMBINATION
-
STARTING WITH THE BUILT
79 - Device Ports
Figure 33. Connecting an External Video Device
,
IN DISPLAY PANEL ONLY MOVING TO THE EXTERNAL MONITOR
-
IN DISPLAY PANEL AND AN EXTERNAL MONITOR
,
YOU WILL STEP TO THE NEXT
.