Shutdown And Startup Problems - Fujitsu FPCR32972 User Manual

Problem
The battery seems to
discharge too quickly.
(continued)

Shutdown and Startup Problems

The Suspend/Resume but-
ton does not work.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
Possible Cause Possible Solutions
The battery is very old. Replace the battery.
The battery has been Replace the battery.
exposed to high temper-
atures.
The battery is too hot or Restore the notebook to normal operating temperature. Charging
too cold. icon on the Status Indicator panel will flash when battery is out-
side of operating range.
Suspend/Resume In Windows XP, enable the button by going to the Control Panel ->
button is disabled. Power Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the option that best suits your needs.
In Windows Vista, select the "Choose what the power button
does" option.
There may be applica- Close all applications and try the button again.
tion software. conflict
The boot sequence set- Set the operating source by pressing the [ESC] key while the
tings of the setup utility Fujitsu logo is on screen or use the [F2] key and enter the setup
are not compatible with utility and adjust the source settings from the Boot menu. See
your configuration. "BIOS Setup Utility" on page 41.
You have a secured Make sure you have the right password. Enter the setup utility and
system requiring a verify the Security settings and modify them as accordingly. See
password to load your "BIOS Setup Utility" on page 41.
operating system.
Internal hard drive was Use the BIOS setup utility or Primary Master submenu, located
not detected. within the Main menu, to try to auto detect the internal hard drive.
89 - Troubleshooting