Installing A Snapcap; Removing A Snapcap; Removing A Color Lid - Fujitsu FPCR32972 User Manual

Installing a Color Lid
Color Lids are attached to connections on the top of the display cover and adjacent to the cover hinges.
•
U
SE CARE WHEN INSTALLING OR REMOVING A
INJURY
•
W
HEN INSTALLING OR REMOVING A
CORRESPONDING NOTCH ON YOUR
A HOOK BECOMES BROKEN
•
D
O NOT USE EXCESSIVE FORCE WHEN PRESSING DOWN ON THE ATTACHMENT POINTS
COULD RESULT IN DAMAGE TO YOUR DISPLAY
•
D
O NOT EXPOSE A
TEMPERATURES
•
W
HEN YOU CLEAN A
CHEMICALS OR OTHER VOLATILE MATERIALS WHICH COULD DAMAGE A
To install a Color Lid:
1
Attach a Color Lid to your PC by lying it flat against the back of the display and aligning the two hooks with the
corresponding notches located in front of the display hinges. (The notch locations are shown in Figure 20.)
2
There are four hooks along each side and four along the front edge. Attach the side hooks first, starting from
the hinge edge, by pressing gently at the hook location.
3
Attach the front hooks, starting from the outside edges.

Removing a Color Lid

1
Unhook the front edge of the lid first, starting with the two inside hooks.
2
Unhook the sides of the lid, starting with the front ones and moving back.
3
Remove the lid by unlatching the two hooks from the hinge notches.
.
, C
THE
C L
OLOR ID TO HIGH TEMPERATURES
.
C L ,
OLOR ID WIPE IT GENTLY WITH A DRY
58 - LifeBook Color Lid
C L ;
OLOR ID THE EDGES ARE SHARP AND MAY CAUSE
C L ,
OLOR ID ALIGN EACH HOOK OF THE
PC. I
F NOT ALIGNED CORRECTLY
L
OLOR ID SHOULD NOT BE USED ON YOUR
.
;
IT MAY BE DAMAGED BY HIGH
C L
OLOR ID TO ITS
,
THE HOOK MAY BE BROKEN
PC.
;
DOING SO
, . N
CLEAN CLOTH EVER USE ANY
C L .
OLOR ID
. I
F