Internal Lan (Rj-45) Jack; Universal Serial Bus Ports - Fujitsu FPCR32972 User Manual

Internal LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for a 10Base-T/100Base-Tx Ethernet LAN connection. You may
need to configure your notebook to work with your particular network. (Please refer to your network
administrator for information on your network configuration.) To connect the LAN cable follow these
easy steps:
1
Align the connector with the port
opening.
2
Push the connector into the port
until it is seated.
3
Plug the other end of the cable into
a LAN outlet.

Universal Serial Bus Ports

The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads,
pointing devices, keyboards and/or speakers. There are three USB 2.0 ports on your notebook: two on the
right side and one on the rear.
In order to connect a USB device follow these steps:
1
Align the connector with the port opening, then push the connector into the port until it is seated.
D
UE TO THE ONGOING CHANGES IN
/
AND OR DRIVERS ARE GUARANTEED TO WORK
Figure 31. Connecting LAN Device
USB
TECHNOLOGY AND STANDARDS
.
77 - Device Ports
, USB
NOT ALL DEVICES