Removing The Mini-Pci Card Assembly; Replacing The Mini-Pci Card Assembly - Dell C600 - Latitude Intel P-4 1.4GHz Service Manual

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

Removing the Mini-PCI Card Assembly

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove
any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the memory module
2. To release the mini-PCI card assembly from its socket, spread apart the metal securing tabs until
the assembly pops up slightly.
3. Lift the mini-PCI card assembly out of its socket and disconnect any attached cables.

Replacing the Mini-PCI Card Assembly

NOTICE: The mini-PCI card must be inserted at a 45-degree angle to avoid damaging the
connector.
NOTICE: The mini-PCI card is keyed, or designed to fit into its socket, in only one direction. Do
not force the connection.
1. Align the mini-PCI card with the socket at a 45-degree angle, and press the mini-PCI card firmly
into the socket.
file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (7 of 40) [2/28/2004 7:53:33 AM]
"Preparing to Work Inside the
cover.
Computer" before performing the following