Removing The System Board - Dell C600 - Latitude Intel P-4 1.4GHz Service Manual

Latitude c600/c500 series

Hide thumbs Also See for C600 - Latitude Intel P-4 1.4GHz:

Table of Contents

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

Removing the System Board

NOTICE:

Disconnect the computer and any attached devices from electrical outlets, and remove

any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching an unpainted metal on the computer.

NOTICE:

Read

procedure.

1. Remove the

hard

2. Remove the

keyboard

3. Remove the

display

4. Remove the

palmrest

5. Remove the

thermal cooling assembly.

6. Remove the microprocessor.

7. Verify that all PC Cards or plastic blanks are removed from the PC Card slot.

8. Verify that the PC Card ejectors do not extend from the PC Card slot.

9. Turn the computer over, and remove the six M2.5 x 5-mm screws labeled with a "circle B" that

secure the system board assembly to the bottom case assembly.

10. Remove the three M2.5 x 5-mm screws labeled with a "circle B" that secure the fan guard to the

file:///F|/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (36 of 40) [2/28/2004 7:53:33 AM]

"Preparing to Work Inside the

drive.

assembly.

Computer" before performing the following

Table of Contents

C600 p-4 1.4ghz Latitude c600 series Latitude c500 series