config
2
Command Example
config.security.authentication.RADIUS.show
Command Example
E/OS Command Line Interface User Manual
2-46
There are three slots available for RADIUS servers. Servers will be
added into the list by the index value. The range is 1 to 3. If a server is
added and there is an empty slot before that server, it will be shifted
up to the empty slot. The IP:port is the IP address and the UDP port
on the RADIUS server.
NOTE: If you want to configure a RADIUS server without a key, you must
specify the key as "". The set of double quotes is an empty string in the CLI.
This command has one required parameter, and two optional
Parameters
parameters:
index
IP
port
Root> config security authentication RADIUS server 3
14.2.114.183:6
Syntax
show
This command displays the current RADIUS server configuration.
Purpose
This command has no parameters.
Parameters
Root> config security authentication RADIUS show
This command displays all three configured RADIUS servers.
Output
Deadtime
Server
Attempts
Timeout
Index of the RADIUS server (1-3) to add or
modify.
IP address of the server.
The UDP port number.
The amount of time a server is marked as
"dead".
The IP address and UDP port of the
configured RADIUS server.
The number of transmit attempts.
The timeout value for a server in seconds.