Show.loginserver - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Parameters
Command Example
Output
Output Example
Date / Time Port
---------------- ----
02/27/03 01:28P 20
02/27/03 01:28P 4
02/27/03 01:27P 62
02/27/03 01:27P 62

show.loginServer

Syntax
Purpose
Parameters
Command Example
This command has one optional parameter:
This optional parameter causes all link incident
clear
log entries to be cleared.
Root> show linkIncidentLog
The event log data are displayed as a table that includes the following
properties:
Date/Time The date and time when the event occurred.
Port The number of the port where the link incident
occurred.
Link Incident An ASCII string describing the link incident
Event event.
The output from the show.linkIncidentLog command appears as
follows:
Link Incident Event
------------------------------------------------------
Not Operational primitive sequence (NOS) received.
Primitive sequence timeout.
Not Operational primitive sequence (NOS) received.
Invalid primitive seq received for current link state
loginServer
This command displays information from the login server database
for devices attached to this switch. Note that it is possible to have
more than one device per port for any public loop devices attached to
an FL_Port.
This command has no parameters.
Root> show loginServer
show
CLI Commands
2-189
2