Windows 2000 - Epson 500DN - B Color Inkjet Printer Network Manual

5. For LPR or Microsoft Network Shared printing:
Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties
dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP
address and so on if necessary, then click OK.
6. Restart the computer.
The necessary components are now installed. Go to the section "Connecting the Network
Interface to the Network" on page 21.

Windows 2000

For Windows 2000, use the following procedure to install the necessary components.
1. Click Start, point to Settings, and then select Network and Dial-up Connections. The
Network and Dial-up Connections screen appears.
2. Right-click the desired network connection and then select Properties.
3. Check if the following necessary components are in the list. If they are already installed,
go to the next chapter.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP or SNMP (IP trap)
MS Network
Necessary components
Internet Protocol (TCP/IP)
Internet Protocol (TCP/IP)
19
How To