Dynacord DSP 244 Owner's Manual page 33

CHANNEL DELAY
These delays are provided in the output channels OUT1 - OUT4. They are used to compensate differences
in loudspeaker dispersion plains that can be cabinet imminent or result from the positioning of individual
loudspeaker cabinets or arrays.
The delay time or acoustical distance is displayed in milliseconds, microseconds, feet, inches, meters, or
centimeters. The environmental temperature appears as additional parameter whenever distances are
displayed. Thus, up to 3 parameters are available.
Parameter
Delay
Unit
Temp
The Delay parameter determines the delay time of the corresponding channel or the distance between
different loudspeaker clusters.
Unit allows the user to select between time or distance display. Distances are automatically converted
into delay times plus the calculation additionally includes the influence of the environmental temperature.
Temp allows you to enter a value for the momentary environmental temperature. This parameter appears
only when the selected display-unit is distance. The affect of the environmental temperature on the
resulting delay time is automatically included in the calculation.
Settings / Value range
0 ms - 900 ms
0 µs - 900000 µs
0 feet - 1014 feet
0 inch - 12169 inch
0 m - 309 m
0 cm - 30910 cm
ms, µs, feet, inch, m, cm
-20°C - 60°C
-4°F - 140°F
8-11
P A R A M E T E R S
Default
0 ms
ms
20°C