Dynacord DSP 244 Owner's Manual page 17

C O N F I G U R A T I O N S O F T H E D S P 2 4 4
6.7 2-IN-4
In this configuration, all 4 outputs are configured for full range operation. OUT 1 and OUT 2 get their
signal-feed from the input channel IN 1 while OUT 3 and OUT 4 are fed from the input channel IN 2. This
structure is suitable for instance for the equalization of full range (wide-band) loudspeaker systems or
passive multi-way systems. The following signal flow diagram shows the assignment of the inputs and
outputs. An example of a typical multi-channel, full range sound reinforcement system configuration is
shown in the figure next to the diagram.
6-5