Charging The Battery - Sony COM-1/W - Mylo™ Personal Communicator Startup Manual

Notes
• Turn off the unit before replacing the battery. Removing the battery while the unit is
turned on may damage data in the unit and cause a malfunction.
• Be sure the battery is inserted when the unit is in use. Using the unit without the battery
is neither recommended nor supported.
• Do not use any other type of battery in your unit.

Charging the battery

Charge the battery using either the supplied AC power adaptor or the supplied
USB cable. Connect your unit and power source as shown in the following
illustration.
The unit automatically turns on and starts charging the battery, the POWER
and the CHARGE indicators light up, and the battery indicator sections (
appear in the display in succession as charging progresses.
When the supplied AC power adaptor is used, a complete charge requires
approximately 3 hours (when the unit is turned off) to 7.5 hours. Charging
may take a long time depending on the operating conditions. The unit is in a
standby mode for charging while the unit is performing any of the following:
– Playing music without the headset
– Playing video
– Viewing photos
– Viewing Web pages
– Wireless LAN is turned on (except for a standby mode for incoming chats
and calls)
When the USB cable is used, a complete charge requires approximately 4
hours.
Connection using the supplied AC power adaptor
16
To DC IN 6V jack
AC power adaptor (supplied)
To wall outlet
)