Step 1: Preparing A Power Source; Installing The Supplied Battery - Sony COM-1/W - Mylo™ Personal Communicator Startup Manual

Step 1: Preparing a Power Source

Installing the supplied battery

Make sure that the battery is inserted before using the unit.
1 Open the battery compartment cover by placing your thumb or finger on
the word "Open" on one end of the cover and pressing towards the other
end of the cover.
2 Insert the battery, label side up, aligning the metal contacts on the battery
with the contacts inside the battery compartment.
3 Slide the battery compartment cover back onto the back of the unit until it
clicks into place.
Continued 
15