Pioneer BDP-53FD Operating Instructions Manual page 43

Setting Options
Single
HDMI Mode (BDP-53FD)
Separate
Pure Audio
Also refer to Setting the HDMI Mode (Only for BDP-53FD) on page 17.
Color Space RGB
YCbCr
YCbCr 422
Full RGB
Auto
Resolution
480I/576I
480P/576P
720P
1080I
1080P
On the BDP-53FD, no video signal is output from the HDMI OUT (MAIN) terminal when the resolution is set to 480I/576I.
HDMI Audio Out Bitstream
PCM
Re-encode
Off
Control On
Off
To use Sound Retriever Link, Stream Smoother Link and PQLS (pages 17 and 18), Control must be set to On.
HDMI Deep color 30bits
36bits
Off
On
HDMI 1080P 24Hz
Off
HDMI 3D Auto
Off
3D notice Yes
No
IP setting Select this to set the IP address of the player and DNS server (page 46).
Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 46).
Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection test Select this to test the network connection (page 47).
Internet Connection Enable
Disable
Permitted
BD-Live connection
Partial Permitted
Prohibited
DLNA Enable
Disable
Explanation
Select this when an HDMI cable is connected to HDMI OUT (MAIN) terminal only.
Select this when HDMI cables are connected to both HDMI OUT terminals.
Select this to enjoy music only with a better sound quality when devices are
connected to both HDMI output terminals. With this setting, music is output
from the HDMI OUT (SUB) terminal only, and video signals are only output
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
Output the video signals from the HDMI OUT terminal with the selected
resolution.
The resolution can be changed by pressing HDMI, but Auto cannot be
selected.
Select this to output HDMI audio signals directly.
Select this to output HDMI audio signals converted to 2-channel audio signals.
Select this to choose the type of audio signals automatically.
Select this when you do not want to output the audio signal from the HDMI
output terminal.
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 17.
Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
Select this when outputting the video signals with 30-bit color.
Select this when outputting the video signals with 36-bit color.
Select this when outputting the video signals with normal 24-bit color.
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
With 3D discs, the disc is played with 3D images.
Even with 3D discs, the disc is played with 2D images.
This sets whether or not to display the 3D notice when playing 3D images.
Select this when connecting to the Internet.
Select this when not connecting to the Internet.
All discs are allowed to connect to BD-LIVE.
Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
No disc is allowed to connect to BD-LIVE.
Select this when connecting to DLNA server.
Select this when not connecting to DLNA server.
07
43
En