Switching The Secondary Video; Enjoying Bonusview Or Bd-Live - Pioneer BDP-53FD Operating Instructions Manual

Switching the secondary
video
Use the procedure below to switch the secondary video
(Picture-in-Picture) recorded on the BD-ROM.
 During playback, press 2nd VIDEO.
• The current secondary video and total number of
recorded secondary video streams are displayed on
the TV screen.
To switch the secondary video, press 2nd VIDEO
again.
Primary audio/video
• The secondary video can also be switched by
selecting Secondary Video from the FUNCTION
menu.
• If the secondary video is not switched when 2nd
VIDEO is pressed, switch it from the disc menu
screen.
 Turning the Secondary Video off
 Press 2nd VIDEO several times or select
Secondary Video from the FUNCTION menu to switch
the setting to Off.
Enjoying BONUSVIEW or
BD-LIVE
This player is compatible with BD-Video BONUSVIEW
and BD-LIVE.
When using BD-Video discs compatible with
BONUSVIEW, you can enjoy such functions as secondary
video (picture in picture) (above) and secondary audio
(page 30). With BD-Video discs supporting BD-LIVE,
special video images and other data can be downloaded
from the Internet.
Data recorded on BD video and downloaded from BD-
LIVE is stored on the USB memory device (external
memory). To enjoy these functions, connect a USB
memory device (minimum 1 GB capacity, 2 GB or greater
recommended) supporting USB 2.0 High Speed (480
Mbit/s) to the USB port.
• When you insert or remove a USB memory device, be
sure to turn the player's power off.
• To recall data stored in the USB memory device, first
insert the disc media that was being used at the time
the data was downloaded (if a different disc is loaded,
the data stored on the USB memory device cannot be
played).
Secondary audio/video
• If a USB memory device containing other data
(previously recorded) is used, the video and audio
may not play back properly.
• Do not disconnect the USB memory device while
playback is in progress.
• Some time may be required for the data to load (read/
write).
Caution
• It may not be possible to use the BONUSVIEW and
BD-LIVE functions if there is insufficient space on the
USB memory device. In this case, refer to Erasing data
that has been added to BDs and application data on
page 47 for erasing the Virtual Package data and the
BD-LIVE data in the USB memory device.
Note
• Operation of USB memory devices is not guaranteed.
• Playback of BD-LIVE function data differs depending
on the disc used. For details, consult the user
instructions supplied with the disc.
• To enjoy the BD-LIVE function, a network connection
and settings are required (pages 22 and 46).
• BD-LIVE is a function that provides for connection to
the Internet. Discs supporting the BD-LIVE function
may send ID codes identifying this player and the disc
to the contents provider via the Internet.
04
31
En