Maximizing Performance; Reaching The Highest Possible Data Transfer Rate; Updating The Firmware; Using 48X Read/Write Speed For Cds - Sony VRD-VC20 Operating Instructions Manual

Maximizing performance

Reaching the highest possible data transfer rate

Make sure that you use high-speed certified discs for which this operation has
been guaranteed by Sony. For the latest information about these discs, visit the
user support web site. When using discs other than those mentioned above, the
drive may limit writing speed to preserve a good reading quality.

Updating the firmware

We recommend using the drive with the latest firmware as some problems
encountered when using the drive can be solved simply by updating the drive
firmware. Firmware updates are available on the user support web site. See
page 50 for details.
Hint
The firmware is the built-in software that makes the drive work.

Using 48x read/write speed for CDs

The default read/write speed for CDs of this drive is 40× speed. With a single
touch, you can make the read/write speed 48× speed.
Notes
• On rare occasions, some discs may not be able to tolerate 48× speed, causing them to break.
We recommend that you do not use deeply scratched, brittle, or other discs that may break
at 48× speed.
• This function does not guarantee a 48× write speed. Depending on the condition of the disc
you are using, the speed may be lower.
• This function does not increase read/write speed with CD-RW discs.
1
Insert a disc into the drive.
The read/write speed when you insert a disc is normally 40× speed.
2
Press the Eject button for five seconds.
The busy indicator blinks twice and the read/write speed switches to 48× speed.
Hint
When you open the disc tray, the read/write speed reverts to its default of 40× speed.
40