Disconnection; Installing The Software - Sony VRD-VC20 Operating Instructions Manual

Installing the software

1
Click [INSTALL SUITE] button to install the software.
Click [INSTALL SUITE].
2
After installation is complete, continue to install other options or
click [EXIT] to finish installation.

Disconnection

The disconnection procedure varies depending on your OS.
When your computer detects the drive successfully,
Windows task bar. When you want to disconnect the drive, you must first stop
it using this icon.
1
Click
on the shortcut menu.
2
Operate following the message displayed, if any.
3
Disconnect the USB cable.
Note
If you disconnect the USB cable without performing the procedure above, your computer
may operate erratically or data may be damaged. Be sure to perform the procedure above
before disconnecting the USB cable.
on the task bar, and click the drive to be disconnected
appears on the
37