Epson 2180 - LQ B/W Dot-matrix Printer Service Manual page 13

LQ-2180
Table 1-11. Continuous Paper (Single sheet and Multi Part)
Front Entry
Min. Max.
(inch) 4
Width
(mm) 101.6 406.4
Length (inch) 4
(one page) (mm) 101.6 558.8
1 original + 5
Copies
copies
Total (inch) 0.0025 0.018
Thickness (mm) 0.065 0.46
Weight
2
(g/m ) 52
(not multi
(lb.) 14
part)
Weight
2
(g/m ) 40
(one sheet
(lb.) 12
of multi part)
Quality Plain paper, Recycled paper, Carbonless multi part paper
Jointing Point glue or paper staple (both side)
Product Description
Rear Entry Bottom Entry
Min. Max. Min.
16 4 16 4
101.6 406.4 101.6
22 4 22 4
101.6 558.8 101.6
1 original + 5 1 original + 5
copies copies
0.0025 0.018 0.0025
0.065 0.46 0.065
82 52 82 52
22 14 22 14
58 40 58 40
15 12 15 12
Table 1-12. Continuous Paper with Labels
Max.
16
Label size
406.4
22
Base sheet width
558.8
Base sheet length
(one page)
0.018 Base sheet
0.46 thickness
Total thickness
82
22
Label weight
58
15
Quality
NOTE: Printing on labels si available only under normal temperature
and humidity condition.
NOTE: The base sheet of labels must be continuous paper.
NOTE: Continuous paper with labels should be inserted from the
front or bottom entrance.
15/16inch
(23.8 mm)
min.
Figure 1-1. Printable Area - Label
Specifications
Front Entry Bottom Entry
Min. Max. Min.
See the figure See the figure
below below
(inch) 4 16 4
(mm) 101.6 406.4 101.6
(inch) 4 22 4
(mm) 101.6 558.8 101.6
(inch) 0.0028 0.0035 0.0028
(mm) 0.07 0.09 0.07
(inch) 0.0063 0.0075 0.0063
(mm) 0.16 0.19 0.16
2
(g/m ) 68 68
(lb.) 17 17
AVERY CONTINUOUS FORM
LABELS, AVERY MINI-LINE LABELS
or the same quality labels
2.5 inch (63.5 mm) min.
Label
R 0.1 inch (2.5 mm) min.
Revision A
Rear Entry
Max. Min. Max.
- - -
16
--- ---
406.4
22
--- ---
558.8
0.0035
--- ---
0.09
0.0075
0.19
- - -
13