Metering - DXG -528 User Manual

Note: The ISO option can only be changed when the cam-
era mode is set to Manual. See "Auto or Manual
Mode" on page 35.
To set the ISO value:
1 . Turn the camera on and ensure that it is in Photo mode.
2. Press the menu button.
3. Use the joystick to highl
4. Use the joystick to select automatic ,
ISO200 , or ISO 400
5. Press the menu button again to le
4.1.10 Meteri ng
Use the metering opt
metering is used to calculate the exposure of the picture. The
metering can be set to an average value across the whole scene
a center weighted value or a spot value in the center of the
scene.
N ote: The metering option can only be changed when the
camera mode is set to Manual. See "Auto or Manual
Mode" on page 35.
1. Turn the camera on and ensure that it is in Photo mode.
2. Press the menu button.
3. Use the joystick to highl
4. Use the joystick to select average, center weighted or s

metering.

5. Press the m enu button again to leave the menu.
ight the ISO option.
.
ave the menu.
ion to determine how the camera light
ight the METERING option.
41
ISO 100 ,
pot
,