Selecting Or Changing The Startup Device Sequence; Exiting From The Setup Utility Program - Lenovo 3257A5U User Manual

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the
following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on
2. From the Setup Utility program main menu, select Startup.
3. Select the devices for the Primary Startup Sequence, the Automatic Startup
4. Press F10 to save and exit the Setup Utility program. See "Exiting from the

Exiting from the Setup Utility program

After you finish viewing or changing settings, press Esc to return to the Setup
Utility program main menu. You might have to press Esc several times. Do one of
the following:
v If you want to save the new settings, press F10 to save and exit the Setup Utility
v If you do not want to save the settings, select Exit → Discard Changes and Exit.
v If you want to return to the default settings, press F9 to load the default settings.
46
User Guide
page 43.
Sequence, and the Error Startup Sequence. Read the information displayed on
the right side of the screen.
Setup Utility program."
program.