DVDO High Definition Video Processor & Hub Edge Setup Manual page 11

Input Wizard: Step 3, Associate an Audio Input
Associate Audio is used to create an audio/video pair of inputs (for non-HDMI inputs). The pair will switch together when you switch
input components.
3a. Associate Audio
"Associate Audio" is used to create
an audio/video pair of inputs that
are switched as a unit.
If your source component does not
have HDMI output, then you have
set upEDGE so that it treats a video
input and an audio input as a pair
for switching.
"Associate Audio" lets you choose the audio
input that is paired with the current video
input.
If you are using HDMI input, you do not have
to Associate Audio; you can exit the Input
Wizard.
3b. Choose an audio input.
Choose the audio input that you
want to Associate with the current
video input.
You are finished setting up this input
component.
Left Arrow Exits Input Wizard
11