Connecting With The Pc - LG E2370V Owner's Manual

Connecting the Display

Connecting with the PC

1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable
of the signal cable.
A
Connect DVI-D(Digital signal) Cable
B Connect D-sub(Analog signal) Cable
C
Connect HDMI Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Headphone/Earphone output
Wall-outlet type
1
and power cord
Varies according to model.
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.
7
2
in order, then tighten the screw
* HDMI is optimized on the AV equipment.
DVI-D (This feature is not
available in all countries.)
When using a D-Sub signal input cable
connector for Macintosh
Mac adapter : For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-
sub VGA connector on the supplied cable
to a 15 pin 2 row connector.
AV equipment
(Set-Top Box, DVD,
Video, Video Game
Console)