Table of Contents
Advertisement
5–Projects
Project organization
This unit manages audio files in projects. An SD card/ CF
card contains session folders that hold audio files, which
are called takes.
Project
Contains all the materials for one program or work
Session
A collection of materials within a project
Take
Materials recorded in a session
CAUTION
The sampling frequency in a project is fixed.
File formats
This unit can record and play files with the following types
of formats.
File format
BWF / WAV*1
Sampling frequencies
44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
Bit-length
16/24-bit
Number of tracks
2 tracks
*1 Recording of WAV file is not available on this unit.
(Only playback is available.)
PROJECT screen
Press the PROJECT key on the front panel to open the
project screen.
The last used project screen page (project selection,
session selection, AES31 file selection, take selection
or playlist selection) opens. The following explanations
assume that the
selection screen is open.
PROJECT
34
TASCAM HS-2
Project selection screen
• Directory display
The current directory level and number of projects is
shown. (In the example above, the root directory of the
CF card contains five projects)
• NUM OF SESSION
This shows the number of sessions in each project.
• Fs
This shows the sampling frequency of the project. The
sampling frequency values are abbreviated as follows.
Sampling frequency
44.1 kHz
47.952 kHz (48 kHz –0.1% pull-down)*1
48.048 kHz (48 kHz +0.1% pull-up)*2
88.2 kHz
176.4 kHz
*1, *2
Not compatible with the projects in 47.952kHz/
48.048kHz. When loaded, "
displayed and recording / playback is disabled.
• ENTER button
Touch the
button for the current project (the
e
letter "
" appears in the
C
highlighted yellow), to view the contents of that
project.
If you touch the
button for any project other than
e
the current project a pop-up window will appear
confirming that you want to load that project. Touch
the
button to show the contents of that project
OK
after it completes loading.
• Project name button
Touch to select that project. The letter"
the
icon, which is also highlighted yellow, for the
currently loaded project.
• INFO button
Touch this button to open a pop-up window that
shows information about the project that is currently
selected.
If no project is selected, press this button to show infor-
mation about the entire card.
• CREATE PROJECT button
Touch to open the
CREATE PROJECT
you create a new project.
• MULTI SELECT button
Touch to enable the selection of multiple projects.
Fs abbreviation
44k
48k–
48k+
88k
176k
" is
Unsupported Fs.
icon, which is also
" appears in
C
screen where
Advertisement
Table of Contents
