Maintenance Items; Miscellaneous - Tascam HD-P2 Release Notes

Maintenance Items:

• Timecode cannot be turned on while in File Edit screen. This is because the File Edit
screen requires control by the transport keys in conflict with those keys' use while in
timecode chase mode.
o The file edit screen can no longer be entered while chasing timecode.
• Previously, when chasing timecode and the timecode was stopped & started quickly,
the HD-P2 would sometimes not re-enter chase (even with Auto Trigger mode
enabled). This has been fixed.
• Rare instances of no audio playback at 192k while chasing timecode using certain CF
cards have been fixed.
• Previously, a buffer overrun could occur with Pre-Record enabled and beginning to
record at 00:0:00:00. This has been fixed.
• Previously, buffered audio wasn't being written to disk when stop was pressed. This
has been fixed.
• Previously, chasing timecode at 23.976 or 24.975 would not work under certain
conditions. This has been fixed.
• Previously, the correct clock source was not shown in the Audio Clock Information
screen when timecode was enabled. This has been fixed.
• Input monitor is now correctly turned on when waiting to record locked to timecode.
• Previously, too many markers could be created under certain conditions when
recording and chasing timecode. This has been fixed.
• The Max File Size parameter is now included in the system defaults.
• A New Project or Load Project command now correctly turns off the timecode LED.
• Previously, locating during playback did not function consistently as expected if a
Locate button was pressed multiple times quickly. This has been fixed.
• Previously, renaming a project could cause audio output to mute until the project was
reloaded. This has been fixed.
• Previously, discontiguous timecode, or the HD-P2 attempting to lock to timecode
before the code was stable, could result in extra takes being written. This has been
fixed.
• Previously, viewing the More Information screen from the File Edit screen would
disable timecode chase. This has been fixed.
• The ":" frame separater is now displayed correctly in the menus, including the ","
separator for drop frame operation.

Miscellaneous:

• Some USB keyboards will not work with the HD-P2 when using a USB to PS/2
adapter. Using a PS/2 keyboard is strongly recommended for correct operation.
• Note that the Media Speed Check utility is optimized for use with solid state Flash
media.