Before You Begin; Connecting The Standard Antennas - 3Com 3CRWE825075A User Manual

Regulatory restrictions dictate that when this device is operational, the minimal
body-to-antenna distance is 1 Meter (3 Feet).
B Y
EFORE OU
Record the access point MAC address in a safe place before the access point is
installed in a hard-to-reach location. The MAC address is printed on the back of the
access point housing.
The following illustration shows the front and rear views of the access point, including
the LEDs and connecting ports.
Access Point 8500
Caution: Do not connect a telephone cable into the Console port; doing so can cause
serious damage to the access point.
C
ONNECTING THE
The Access Point 8250 and Access Point 8750 are supplied with standard detachable
antennas. These should be attached before the access point is installed. If using an
alternate antenna, see "Selecting and Connecting a Different Antenna Model" on
page 22.
B
EGIN
Access Point 8250/8750
S
TANDARD
Reset
button
LEDs
A
NTENNAS
16
Console port
Ethernet port