Installing Your Usb Modem - Cisco Small Business WRP400 User Manual

Installing and Configuring Your Mobile Network

Installing Your USB Modem

Installing Your USB Modem
NOTE
NOTE
Cisco WRP400 User Guide
You can install a compatible Mobile Broadband USB Modem into the USB port of
the WRP400 for the purpose of accessing a mobile network.
For more information about compatible USB devices, visit the WRP400 product page on
Cisco.com: http://www.cisco.com/en/US/products/ps10028/index.html
Connect a compatible USB Modem into the USB port of the WRP400. The Power
LED flashes green and orange, indicating that a device is connected to the USB
port and that initialization is in progress.
After the device initializes, the Power LED shines steady green. If the device fails
to initialize, the LED continues to flash green and orange.
By default, the WRP400 connects to the Internet through the local Ethernet, if available. The
mobile network connection is used as a failover when an Ethernet connection is unavailable.
For more information about configuring your mobile network, see
Network," on page 43.
5
"Setup > Mobile
42