Cisco Small Business WRP400 User Manual page 133

Specifications
Cisco WRP400 User Guide
Voice RFCs RFC 2396 (URI : Generic Identifier)
Compliance
Draft-ieft-mmusic-media-loopback-04.txt (Media Loopback)
continued
Draft-ietf-sip-privacy-04.txt (Remote-party ID)
Provisioning, Web Browser Administration & Configuration via Integral Web Server
Administration
Telephone Key Pad Configuration with Interactive Voice Prompts
and
Provisioning/Configuration/Authentication via HTTPS, HTTP, TFTP
Maintenance:
Provisioning Support for Configuring Router/Data and Voice Parameters
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records
Per Line and Purpose Configurable Syslog and Debug Options
Physical 4 100baseT RJ-45 Ethernet LAN Port (IEEE 802.3u)
Interfaces:
1 100baseT RJ-45 Ethernet WAN Port (IEEE 802.3u)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device
USB 2.0 for Mobile Broadband Connection modems (available
separately)
Buttons Reset, WPS
Subscriber Ring Voltage: 40-55 Vrms
Line Interface
Ring Frequency: 10 Hz ~ 40Hz
Circuit (SLIC)
Ring Waveform: Trapezoidal and Sinosoidal
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
•
On-hook voltage (tip/ring): - 46 ~ -56V
•
Off-hook current: 18 ~ 20mA
Frequency Response: 300 – 3400Hz
Terminating Impedance : 8 Configurable Settings including North
America 600 ohms, European CTR21
Regulatory FCC (Part 15 Class B), CE, ICES-003, RoHS, UL, A-Tick, NZ Telepermit, CB
Compliance:
Number of 1
Antennas
Connector Fixed
Type
B
131