Cisco Small Business WRP400 User Manual page 129

Troubleshooting
Cisco WRP400 User Guide
on to the WRP400 web-based utility and use the Setup tab > Mobile
Network page and the Setup tab > Ethernet Recovery page. For more
information, see
Connection Recovery," on page
Q. How do you know which mobile network you are using?
Follow these instructions:
a. Open a web browser.
b. Enter the IP address of the WRP400 in the Address field (the default IP
address is 192. 1 68. 1 5. 1 ). Then press Enter.
c. When prompted, complete the User name and Password fields (the
default user name and password is admin). Click OK.
d. Click the Status tab.
e. Click the Mobile Network tab. In the Mobile Network Status section, on
the Carrier line, you will see the name of the network that you are
currently using.
Q. Can I make a VoIP call over the mobile broadband network?
If the WRP400 is configured to use a Mobile Broadband USB modem and
voice services with an Internet telephony service provider, the WRP400 can
send and receive voice traffic over the mobile broadband network.
However, because a voice service is more sensitive to latency and network
congestion compared to data services, your voice quality over the mobile
network cannot be guaranteed.
Q. What if my Mobile Broadband USB modem is not supported on the
WRP400?
Cisco is continuously adding support for more Mobile Broadband USB
modems and works closely with mobile broadband providers and
manufacturers to stay current with the latest devices available. For a current
list of supported Mobile Broadband USB Modems, visit the WRP400
product page at www.cisco.com/en/US/products/ps10028/index.html
"Setup > Mobile Network," on page 43
46.
A
and "Setup >
127